Skip to main content

How to fix common errors on the Roborock Saros 10

Saros 10 docked
Roborock

The Roborock Saros 10 and Saros 10R are two of the best robot vacuums on the market. Capable of mopping, vacuuming, and automatically cleaning themselves, they can go weeks without requiring any manual input. However, like all electronics, they’re not free from issues. And though we didn’t run into any serious issues during our testing, a handful of users are reporting minor errors with their products. Thankfully, these are usually quick fixes — with just a few minutes of maintenance, your Roborock will be back in working order.

Running into any issues with your robot vacuum? Here’s a look at the most common errors on the Roborock Saros 10 and how to fix them. Note that these tips will also work for the Saros 10R.

Recommended Videos

How to fix Error 5

This error relates to the main brush of the robot. To resolve the problem, make sure the brush isn’t caught on anything and that nothing is blocking it from spinning. This includes removing the brush from the robot and checking its installation chamber, as debris and hair can get trapped inside. Once you’ve cleared out any debris, the error should fix itself.

To prevent this error from happening again, consider checking the main brush more often than usual to ensure nothing gets lodged inside its housing.

How to fix Error 9

The Roborock Saros 10 navigating under a tight, low-clearance piece of furniture.
Roborock

This error typically appears when the dustbin and filter are improperly installed. Try re-seating the filter and running the device again. If the dustbin and filter are properly installed and the error doesn’t disappear, check to make sure the magnet is present on the side of the filter. If it’s missing, the robot won’t recognize the filter as being installed. Filters that are missing the magnet need to be replaced to fix this error.

How to fix Error 10

If your filter is clogged, you’ll receive the Error 10 message. Simply clean your filter and allow it to dry fully before placing it back in the robot. Once it’s clean and dry, your robot should no longer receive the error message.

How to fix Error 18

Error 18 indicates some sort of fan and suction issue. There are a few things you can do to try and fix the problem:

  • Remove the dustbin and check it for any stuck debris that may be clogging its airways.
  • Replace or clean the filter.
  • Firmly tap the side of the robot to dislodge any gunk blocking its pathway.

If none of this works, you may need to contact customer support or order a new fan.

How to fix improper surface detection

The Roborock Saros 10R near a plant
Jon Bitner / Digital Trends

While the Saros 10 and 10R typically do an excellent job of determining the type of surface they’re not, some users are reporting issues. This includes treating carpets like hard floors, causing the mops to deploy.

An easy fix for this is to dive into the Roborock mobile app and manually assign floor types. These settings can be found when editing your map, giving you the option to choose exactly where in your home the robot should mop. You could also try cleaning off its various sensors with a soft cloth.

When in doubt, perform a factory reset

Consider this a last resort — if nothing else is working, you’ll need to factory reset your device. This can be done by holding down the home button and pressing the reset button on the top of the device. Keep holding down the home button, then release it once the lights on the top of the device turn off.

Doing this will wipe all your data, but it could also fix any weird issues that other troubleshooting couldn’t solve.

Jon Bitner
Former Digital Trends Contributor
Jon Bitner is a writer covering consumer electronics, technology, and gaming. His work has been published on various websites…
Ultraloq showcases the first-ever ultra-wideband smart lock at CES 2025
Bolt Mission UWB + NFC installed on a white door.

Ultraloq showed off two smart locks at CES 2025 -- one of which is the first smart lock to ever offer ultra-wideband (UWB) support. The Ultraloq Bolt Mission UWB + NFC uses UWB technology to unlock automatically as you approach your front door. Similar functionality already exists on other smart locks, but UWB should allow the Ultraloq Bolt Mission to be more accurate than the competition.

The Bolt Mission uses technology similar to digital car keys, and Ultraloq says it can track the keyholder’s phone location with “centimeter-level” accuracy. As your phone gets closer to the front door, the Bolt Mission can be programmed to automatically unlock, giving you a hands-free way to get inside. Better yet, because the smart lock can detect both your distance and direction from the front door, it should prevent you from accidentally unlocking the smart lock while inside your home.

Read more
Ulticam shows off three AI-powered security cameras at CES 2025
The Ulticam IQ installed outside a home.

Ulticam, the new security camera brand of Xthings, revealed a lineup of three AI-powered cameras at CES 2025. The Ulticam IQ, Ulticam IQ Floodlight, and Ulticam Dot offer not just cool AI capabilities, but also free seven-day cloud storage -- which could make them a solid choice for value-minded shoppers leery about signing up for monthly storage plans.

The Ulticam IQ and IQ Floodlight are the main attractions, as they're packed with features that should pose solid competition for the best smart security cameras from Arlo, Nest, and Ring. The duo uses edge AI to quickly identify people, vehicles, and packages without needing to upload the video for server-side processing. This onboard processing should result in faster performance -- it’s also great for privacy and security, as your footage doesn’t have to leave your device.

Read more
Home Depot expands Hubspace smart home lineup at CES 2025
The Home Depot Hubspace logo on a white background.

Hubspace, Home Depot’s smart home platform, has seen impressive growth over the past few years, and that growth continued at CES 2025. Three new gadgets were revealed at the event, including a wireless power switch to control Hubspace products, a portable air conditioner, and a window-mounted air conditioner. All three are unique additions to the catalog -- and since there’s not much like them on the market, they should quickly become popular options in their respective niches.

The Hubspace Remote Switch is arguably the most useful of the three gadgets. Designed to look like a light switch, but with a removable remote controller, it works with select Hubspace light bulbs, fixtures, plugs, power sockets, surge protectors, and more. You’ll get standard on and off functions, plus access to brightness controls. Its sleek looks and versatility should make it a great choice for shoppers seeking an entry-level smart switch.

Read more